Fiber laser cutting machine is not a panacea, these materials do not use it to cut

Many people think that the fiber laser cutting machine belongs to the category of cutting machine, and the use of imported lasers, the cutting range should be very wide, the effect should be much better than other ways, in fact, there are special types of cutting machine, each cutting machine has his advantages and disadvantages, the following detailed analysis.

First of all,Fiber laser cutting machine belongs to the processing category of metal laser cutting machine, so it can only cut metal, not cloth, leather, stone and other non-metals,The reason is very simple, the wavelength range of the fiber laser cutting machine is not within the absorption range of the above materials, or the absorption is not appropriate, and the ideal cutting effect is not achieved. At present, the advantages of applying to non-metallic cutting are not obvious, of course, it is not ruled out The possibility of developing this demand in the future;

Secondly,Fiber laser cutting machine does not recommend long-term cutting of aluminum, copper and other rare metal materialsBecause these materials are all highly reflective materials (note: high reflection has little to do with the smoothness of the cutting surface of the plate, mainly because the wavelength of the laser is not within the ideal absorption range of these materials, the absorption effect is not good, most of the energy is reflected back, it is easy to damage the protective lens in front of the laser head), the long-term use effect is not good, but also increase the use of consumables;

And finally,Fiber laser cutting machine, according to its power size is different, cutting thick bottom also will change,The greater the power, the greater the cutting thickness, the thinner the metal material, and the faster the cutting speed. The fiber laser cutting machine has obvious advantages for thin plate cutting.