There may be many problems after the laser cutting machine is used for a certain period of time, one of which is the extension of life. The metal laser cutting machine needs us to make a lot of efforts to extend its life. It is our common pursuit to buy machinery with long service life at the same price. Everyone wants to make the metal laser cutting machine use for a longer period of time, but the metal laser cutting machine needs our daily maintenance, let’s take a look at the method of extending the life of the metal laser cutting machine.
Stainless steel laser cutting machine life extension method 1: water replacement and water tank cleaning: it is recommended to clean the water tank and replace the circulating water once a week, it should be noted that: before the machine work must ensure that the laser tube is filled with circulating water. The water quality and temperature of the circulating water will directly affect the service life of the laser tube. It is recommended that the user use pure water and control the water temperature below 35°C. If it exceeds 35 ℃, it is necessary to replace the circulating water or add ice cubes to the water to cool down (it is recommended that users use a cooler or use two water tanks).
Clean the water tank: first turn off the power, unplug the water inlet pipe, let the water in the laser tube automatically flow into the water tank, open the water tank, take out the water pump, and remove the dirt on the water pump. Clean the water tank, replace the circulating water, restore the water pump to the water tank, insert the water pipe connecting the water pump into the water inlet, and arrange the joints. The pump is energized separately and run for 2-3 minutes (so that the laser tube is filled with circulating water).
Stainless steel laser cutting machine life extension method:
Fan cleaning: due to long-term use, will make the fan inside the accumulation of a lot of solid dust, so that the fan produces a lot of noise, is not conducive to exhaust and odor. When the suction of the fan is not good or the smoke exhaust is not smooth, first turn off the power supply, remove the air inlet pipe and the air outlet pipe on the fan, remove the dust inside, then stand the fan upside down, pull the fan blades inside until it is clean, and then install the fan.
Stainless steel laser cutting machine life extension method: guide rail cleaning (recommended cleaning once every half month, shutdown operation) guide rail, linear axis as one of the core components of the equipment, its function is to guide and support the role. In order to ensure that the machine has a higher processing accuracy, then the requirements of the guide rail, linear axis must have a high guide accuracy and good motion stability. During the operation of the equipment, a large amount of corrosive dust and smoke will be generated during the processing of the workpiece. These fumes and dust will be deposited on the surface of the guide rail and linear shaft for a long time, which will have a great impact on the processing accuracy of the equipment, and will be in the guide rail and The surface of the linear shaft forms corrosion points, shortening the service life of the equipment. In order to make the machine work normally and stably and ensure the processing quality of the product, the daily maintenance of the guide rail and linear axis must be carefully done.
In short, if you want to extend the life of the stainless steel laser cutting machine, it is more important to do a good job of cleaning and maintenance. If you often let the stainless steel laser cutting machine fall into complicated work and do not do a good job of cleaning, it will definitely have a great impact on his life, so we should actively do it in this respect!